Kits

CurrentRanger

PRODUCT ID:152

Now available in the EU from Welectron (Germany) What it is The CurrentRanger turns your multimeter or oscilloscope into...

Now available in the EU from Welectron (Germany) What it is The CurrentRanger turns your multimeter or oscilloscope into a precise nano/micro/milli-amp measurement instrument. It avoids the problem of burden voltage present in most DMMs and even some expensive bench multimeters. Important - read the Product Guide before use: It's important to understand how to use the CurrentRanger properly or it can be damaged. To keep cost low, there is no isolation...

$135.00

In Stock

GarageMote Kit [RETIRED]

PRODUCT ID:97

...

$24.95

Out of Stock

EE-SY310 photo reflective sensor breakout

PRODUCT ID:53

What it is: Photo reflective sensor breakout that makes it plug-and-play compatible with Moteino/Arduino or any other microcontroller Dark...

What it is: Photo reflective sensor breakout that makes it plug-and-play compatible with Moteino/Arduino or any other microcontroller Dark ON model (EE-SY310) Digital output HIGH/LOW depending if it detects a dark/bright spot Meant to detect revolutions on spinning wheels/gears that are marked with a dark spot can also be used to detect a water meter dial or a conventional electric meter containing a spinning dial with a dark line wide supply voltage range:...

$5.95

Only 9 left

SonarMote Kit

PRODUCT ID:129

The R2 revision of the SonarMote PCB includes some fixes and lower power - just 10uA average when Moteino & peripherals put to sleep properly! For...

The R2 revision of the SonarMote PCB includes some fixes and lower power - just 10uA average when Moteino & peripherals put to sleep properly! For all assembly and programming details please see the SonarMote Guide Kit includes: SonarMote PCB HC-SR04 ultrasonic/sonar distance sensor 1x40 male and female headers Three 1x4 female headers acrylic case - may come in clear/white/black depending on availability REQUIRED, NOT INCLUDED: Lithium...

$29.95

Out of Stock

BellMote Kit [RETIRED]

PRODUCT ID:132

BellMote is a versatile kit that allows automating your traditional doorbell. Requires a regular Moteino (not included). Requires soldering...

BellMote is a versatile kit that allows automating your traditional doorbell. Requires a regular Moteino (not included). Requires soldering assembly. The project is documented in this blog post. it uses power from the doorbell transformer detects when the doorbell button is pressed It can also trigger the doorbell via a primary relay it can disable the doorbell via a secondary relay What you get (included kit parts): After assembly...

$29.95

Out of Stock

IOShield

PRODUCT ID:136

IOShield allows 16 outputs via two 75HC595 shift registers, and controlled via only 3 Moteino/Arduino pins. Each output goes through a 220ohm...

IOShield allows 16 outputs via two 75HC595 shift registers, and controlled via only 3 Moteino/Arduino pins. Each output goes through a 220ohm resistor and lights up an LED for visual feedback. Sample control, video demo and code are here. Sample sketch running: Optionally you can add the 24VAC input package, which allows you to power this unit externally directly from 24VAC, very convenient when you want to replace something like your old sprinkler controller. Pair this with...

$16.95

Only 19 left

MightyHat [RETIRED]

PRODUCT ID:130

Note: photos show R1-R3 boards. You will receive a R4 board. MightyHat is a RaspberryPi Hat add-on board featuring: ATMega328P based...

Note: photos show R1-R3 boards. You will receive a R4 board. MightyHat is a RaspberryPi Hat add-on board featuring: ATMega328P based microcontroller allows power management (shutdown/reboot) from the push of a button Can easily be used to turn your Pi into an IoT Gateway for sub-ghz networks powered by compatible transceivers (all RFM69 and LoRa) This board is footprint compatible with RFM69W/HW and RFM95/96 transceivers optional LCD for status and messaging 2...

$44.95

Out of Stock

MotionMote Kit

PRODUCT ID:114

Note: The kit price reflects the cost of the Panasonic EKMB1101111 PIR sensor which is included and unfortunately has gone up in price dramatically...

Note: The kit price reflects the cost of the Panasonic EKMB1101111 PIR sensor which is included and unfortunately has gone up in price dramatically since the kit was last available. Assembly & programming guide: see this page add these small motion sensors to your home for your own DIY home motion security small footprint: 47x43x25mm. truly wireless motion detection, move them anywhere anytime ultra low power: ~2uA whole unit current with the EKMB101111...

$34.95

Only 4 left

SwitchMote

PRODUCT ID:128

...

$69.95

Only 12 left

SwitchMote 1x30A Kit

PRODUCT ID:126

Video presentation: Details, disclaimer, safety, assembly instructions: PLEASE READ the disclaimer and assembly/product...

Video presentation: Details, disclaimer, safety, assembly instructions: PLEASE READ the disclaimer and assembly/product guide before you buy! By purchasing SwitchMote PSU you agree with the terms of the disclaimer and take full responsibility for how you assemble and use SwitchMote PSU Solder from small to large components, follow guide here for step-by-step assembly instructions (similar for all SwitchMotes) If you live in a 220-240V...

$34.95

Out of Stock

SwitchMote Button Breakout

PRODUCT ID:148

What it is: front plate 3-button and LED breakout included in SwitchMotes use as general purpose button/LED breakout that can fit into...

What it is: front plate 3-button and LED breakout included in SwitchMotes use as general purpose button/LED breakout that can fit into a standard wall electrical box comes with acrylic cover, LEDs+spacers, resistors, buttons+caps red LEDs use 1.5Kohm resistors, green LEDs use 470ohm resistors, all marked on silkscreen will fit mounting into a standard electrical box as seen in pictures control it easily from a Moteino all buttons and LEDs are broken out on...

$5.95

Out of Stock

SwitchMote PSU

PRODUCT ID:127

This is the R3 revision of the Power Supply Unit (PSU) for SwitchMote 2x10A Note that on this R3 SwtichMote PSU the DC side components are...

This is the R3 revision of the Power Supply Unit (PSU) for SwitchMote 2x10A Note that on this R3 SwtichMote PSU the DC side components are now SMD assembled, you will only need to solder the larger components and the headers. Optionally you may order the assembly service, and the unit will be completely assembled and tested as seen in the photos (with the relay options you choose). Does not include Moteino, you may purchase a Moteino separately. You can use this as a standalone...

$29.95

Out of Stock