GarageMote is a garage door controller shield kit for Moteino that can be used to remotely control a garage door from anywhere on the web or from your smartphone. There are commercial solutions that offer the same thing, but are more integrated with the opener. This solution requires assembly and also installing this device on your garage opener. BEFORE YOU BUY - PLEASE READ: full details, soldering, install and test instructions By purchasing GarageMote you agree that...

The R2 revision of the SonarMote PCB includes some fixes and lower power - just 10uA average when Moteino & peripherals put to sleep properly! For all assembly and programming details please see the SonarMote Guide Kit includes: SonarMote PCB HC-SR04 ultrasonic/sonar distance sensor 1x40 male and female headers Three 1x4 female headers acrylic case - may come in clear/white/black depending on availability REQUIRED, NOT INCLUDED: Lithium...

BellMote is a versatile kit that allows automating your traditional doorbell. Requires a regular Moteino (not included). Requires soldering assembly. The project is documented in this blog post. it uses power from the doorbell transformer detects when the doorbell button is pressed It can also trigger the doorbell via a primary relay it can disable the doorbell via a secondary relay What you get (included kit parts): After assembly...

IOShield allows 16 outputs via two 75HC595 shift registers, and controlled via only 3 Moteino/Arduino pins. Each output goes through a 220ohm resistor and lights up an LED for visual feedback. Sample control, video demo and code are here. Sample sketch running: Optionally you can add the 24VAC input package, which allows you to power this unit externally directly from 24VAC, very convenient when you want to replace something like your old sprinkler controller. Pair this with...

Assembly & programming guide: see this page add these small motion sensors to your home for your own DIY home motion security small footprint: 47x43x25mm. truly wireless motion detection, move them anywhere anytime ultra low power: ~2uA whole unit current with the EKMB101111 Panasonic PIR create motion zones and add them to your Moteino wireless network and watch for movement in your home 3D printed enclosure in black or white PLA see this...

Description, Details, Disclaimer, Safety, Assembly, Programming Please read the disclaimer and assembly/usage/safety guide before you buy! By purchasing SwitchMote you agree with the terms of the disclaimer and take full responsibility for how you assemble and use SwitchMote Optional components Relays options: single 10A relay dual 10A relays single 16A relay ​PIR sensor: make your SwitchMote detect motion (think s...

Video presentation:     Details, disclaimer, safety, assembly instructions: PLEASE READ the disclaimer and assembly/product guide before you buy! By purchasing SwitchMote PSU you agree with the terms of the disclaimer and take full responsibility for how you assemble and use SwitchMote PSU Solder from small to large components, follow guide here for step-by-step assembly instructions (similar for all SwitchMotes) If you live in a 220-240V...