Description, Details, Disclaimer, Safety, Assembly, Programming

• Please read the disclaimer and assembly/usage/safety guide before you buy!
• There are no guarantees or warranties with this product. Mains voltage involved in wiring and powering the SwitchMote. By purchasing SwitchMote you agree with the terms of the disclaimer and take full responsibility for how you assemble and use the SwitchMote.

Firmware is found here in the RFM69 Examples folder.

Features:

• 3x RGB LEDs on front panel
• 3x buttons (A0-A2) (firmware default uses middle button to activate relay), others can be used in pairing/grouping etc.
• 2x AUX buttons for general purpose functions (A4-A5, accessible through the front panel pin holes).
• RST button
• LDR light sensor (firmware default dims the RGB LEDs according to ambient light)
• RFM69HCW (firmware supported), also can be fitted with RFM95/LoRa (same footprint)
• OPTIONAL ​PIR EKMC2601111K motion sensor: make your SwitchMote detect motion (think security!) or automatically turn on lights when you enter your basement or dark room. Also found at Digikey.
• 10A relay
• Mains power 3 terminal connection: NEUTRAL, HOT & LOAD

Kit includes (Shown with optional PIR and both 868/915MHz and 433MHz helicals):

Please note:

• It includes the 4MBIT FLASH-MEM chip for OTA/Wireless Programming