Moteino

PRODUCT ID:99

Now available in the EU from Welectron (Germany) What it is: Please note: due to component shortages and very long lead times,...

Now available in the EU from Welectron (Germany) What it is: Please note: due to component shortages and very long lead times, the Moteino might come with the atmega328PB, but with the standard Dualoptiboot bootloader. To all intents and purposes, it will behave the same as the atmega328P and the user should see no difference in behavior, low power, etc. Moteino is a versatile low power Arduino based on the Atmel ATMega328P/PB microcontroller. Please see the Moteino...

$14.95

In Stock

Moteino (8Mhz)

PRODUCT ID:159

IMPORTANT: Please see the Moteino 8Mhz Guide before you use this board, also read information below. What it is: Moteino 8Mhz is the LDO-less...

IMPORTANT: Please see the Moteino 8Mhz Guide before you use this board, also read information below. What it is: Moteino 8Mhz is the LDO-less variant of the regular Moteino. It is clocked at 8Mhz, has different fuses to run the Brown Out at 1.8v and is designed for powering it from voltages less than 3.6V. The differences to regular Moteino are: no LDO linear regulator the VIN and 3v3 pins are connected and can be considered the same must be powered from...

$15.95

Only 7 left

Moteino (trace antenna)

PRODUCT ID:145

What it is: This is the trace antenna variant of the regular Moteino, otherwise all specifications are identical. The included antenna is tuned...

What it is: This is the trace antenna variant of the regular Moteino, otherwise all specifications are identical. The included antenna is tuned for 868-915mhz and can be used when a transceiver is attached on the bottom. Moteino is a low cost wireless Arduino based on the Atmel ATMega328P/PB microcontroller. For a detailed guide please see this dedicated page. Here are a few features and highlights of Moteino: Low cost Arduino fully compatible with the Arduino...

$14.95

In Stock

Moteino M0

PRODUCT ID:184

Now available in the EU from Welectron (Germany) Ultra low power development board based on the SAMD21G18A Cortex M0+ 32bit ARM processor. Designed...

Now available in the EU from Welectron (Germany) Ultra low power development board based on the SAMD21G18A Cortex M0+ 32bit ARM processor. Designed for use with RFM69 transceivers and RFM95/RFM96 LoRa transceivers. Ideal in projects where battery life is critical and which require the computing and peripheral diversity of SAMD ARM processors. Guide & drivers: Be sure to check out the MoteinoM0 Guide page for usage details and other more in-depth...

$29.95 $24.95

In Stock

Moteino MEGA

PRODUCT ID:119

...

$24.95

In Stock

Moteino MEGA (trace antenna)

PRODUCT ID:139

...

$25.95

In Stock

Moteino-USB

PRODUCT ID:100

Stocks may be available in the EU from Welectron (Germany) What it is: This is the R7-USB revision of Moteino, it is designed for...

Stocks may be available in the EU from Welectron (Germany) What it is: This is the R7-USB revision of Moteino, it is designed for use with FSK transceivers (RFM69HCW, RFM69CW) and LoRa transceivers (RFM95, RFM96). See the transceivers guide. Please note: MoteinoUSB R7 comes with Atmega328PB, with the Dualoptiboot bootloader. To all intents and purposes, it will behave the same as the older Atmega328P and the user should see no difference in behavior, low...

$24.95

In Stock

MoteinoMEGA-USB

PRODUCT ID:138

Now available in the EU from Welectron (Germany) What it is: This is the USB variant of the MoteinoMEGA, it is designed for use...

Now available in the EU from Welectron (Germany) What it is: This is the USB variant of the MoteinoMEGA, it is designed for use with RFM69 transceivers and RFM95/RFM96 LoRa transceivers. It has a built in FTDI USB-to-TTL serial chip, and only a micro-USB cable is required for power and programming. Otherwise it has the same features as the non-USB MoteinoMEGA. Now suitable for LoRaWAN with the LMIC option: see this forum thread for details,...

$29.95

In Stock

RFGateway (M4)

PRODUCT ID:196

Compact RF Gateway board based on the SAMD51J19A Cortex M4 32bit 120Mhz ARM processor Designed for use with RFM69 transceivers...

Compact RF Gateway board based on the SAMD51J19A Cortex M4 32bit 120Mhz ARM processor Designed for use with RFM69 transceivers and RFM95/RFM96 LoRa transceivers Includes 4MBIT flash chip Plugs straight into a USB port, eliminating the inconvenience and noise of USB cables Use with USB serial or UART serial: may be plugged in to the first 5 pins of the Pi where the serial port is located Built in PCB USB connector (2.4mm PCB thickness) Board...

$44.95 $39.95

Only 22 left

FTDI Adapter

PRODUCT ID:90

Now available in the EU from Welectron (Germany) What it is: FTDI-Adapter is a USB-Serial bridge so you can upload programs to Moteino...

Now available in the EU from Welectron (Germany) What it is: FTDI-Adapter is a USB-Serial bridge so you can upload programs to Moteino or communicate to your microcontroller serial controller through your PC's USB port. The pinout is standard [ GND - CTS - VCC - TX - RX - RTS ] and will work with any Arduino clone that has this as a programming interface. Other examples of compatible FTDI adapters you can use to power/program your Moteinos: USB BUBII, FTDI cables here and here, FTDI...

$16.95

Out of Stock

Serial Flash 4Mbit

PRODUCT ID:72

Winbond W25X40CL 4Mbit (512KB) serial SPI flash memory chip. 8-SOIC package (3.9mm width, 0.154"). Can be soldered to any Moteino for data logging...

Winbond W25X40CL 4Mbit (512KB) serial SPI flash memory chip. 8-SOIC package (3.9mm width, 0.154"). Can be soldered to any Moteino for data logging purposes or for wireless programming. Or you may order Moteinos with the Flash chip pre-soldered. Arduino SPIFlash library and example: https://github.com/LowPowerLab/SPIFlash Related blog post: http://lowpowerlab.com/blog/2013/04/04/spiflash-memory-library-for-arduinomoteino/ Note: for wireless programming you will need...

$2.95

In Stock