Moteino USB R7 Schematic

[MotoDan]

Is there a schematic available for the latest R7 USB board? The latest one on github looks like R6. A PDF version would be great if possible.

Thanks!

[Felix]

Actually R7 was an experimental revision based on this thread in the forum, where the request was to add a mosfet to drive one of the serial lines into the FTDI chip.

That turned out to be redundant and "R7" always shipped with a short 0-ohm resistor instead, equivalent to R6 in terms of schematic/wiring.

The new "R6" is also equivalent to the old R6 (and R7) but adds a Reset button. Otherwise the schematic is the same as the R6 before R7 (lol).
The change being only functional and not behavioral, I wanted to revert to the R6 and keep it that way.

Sorry about any confusion. I should update the photos to reflect that, and maybe add a paragraph to document the shift in revision numbering.

[MotoDan]

Thanks for the update Felix. The  Moteino USB boards that I just received are marked R7 and do have the 0 ohm resistor added as you mentioned.

I don't see any board files for the  R6 (or R7) Moteino USB on GitHub. Any chance of adding those?

[Felix]

There's the R5 USB posted, pretty much the same but has HW radio, what are you trying to do?

[MotoDan]

I was just wanting to have a copy of the schematic that matches my new R7 boards.
Thanks

[Felix]

The R6 schematic here is identical to the R7 circuit.