Raspberry Pi 2 Model B and ATXRaspi

[rx7rotary]

Hi There,

I have recently purchased an ATXraspi and a soft touch button. Can I please ask for some assistance in regards to connecting a atxraspi to the raspberry pi model b. There is no schematics for this so if you help me first to identify which pins shall I connect the two wires to the rpi2b.

I have a dedicated Linear Power Supply 5v that I have built into the enclosure with a usb out. Once I plug that into the ATXraspi no LED comes on. Is this a problem.

Thanks and will appreciate any help.
m

[Felix]

lowpowerlab.com/atxraspi

[rx7rotary]

All I need is which 2 pins on rpi 2b represent the two required for shudown procedure?

[Felix]

Can you please take a look at this page?

http://lowpowerlab.com/atxraspi/#installation