Text only | Text with Images

LowPowerLab Forum

Hardware support => ATXRaspi => Topic started by: rx7rotary on March 30, 2016, 08:22:49 AM

Title: Raspberry Pi 2 Model B and ATXRaspi
Post by: rx7rotary on March 30, 2016, 08:22:49 AM
Hi There,

I have recently purchased an ATXraspi and a soft touch button. Can I please ask for some assistance in regards to connecting a atxraspi to the raspberry pi model b. There is no schematics for this so if you help me first to identify which pins shall I connect the two wires to the rpi2b.

I have a dedicated Linear Power Supply 5v that I have built into the enclosure with a usb out. Once I plug that into the ATXraspi no LED comes on. Is this a problem.

Thanks and will appreciate any help.
m
Title: Re: Raspberry Pi 2 Model B and ATXRaspi
Post by: Felix on March 30, 2016, 08:33:48 AM
lowpowerlab.com/atxraspi
Title: Re: Raspberry Pi 2 Model B and ATXRaspi
Post by: rx7rotary on March 30, 2016, 08:39:11 AM
All I need is which 2 pins on rpi 2b represent the two required for shudown procedure?
Title: Re: Raspberry Pi 2 Model B and ATXRaspi
Post by: Felix on March 30, 2016, 09:17:51 AM
Can you please take a look at this page?

http://lowpowerlab.com/atxraspi/#installation
Text only | Text with Images