Author Topic: Full power-off from software with R2.6?  (Read 226 times)

Joiyco

  • NewMember
  • *
  • Posts: 2
Full power-off from software with R2.6?
« on: April 13, 2021, 12:36:26 PM »
Hi there!

I have found an old ATXRaspi R2.6 in the basement from a old Project and want to reuse it.

Ist there are way to modify the R2.6 for software shutdown Like discribed Here for the R3(https://lowpowerlab.com/guide/atxraspi/full-pi-poweroff-from-software/)

Best regards,
Joi

Joiyco

  • NewMember
  • *
  • Posts: 2
Re: Full power-off from software with R2.6?
« Reply #1 on: April 14, 2021, 02:25:23 PM »
I think I found the solution in the Blog
(https://lowpowerlab.com/2016/12/29/atxraspi-full-power-off-from-software/)
There is a Transistor and the a 10k resistor which ist Missing on the R2.6 PCB but it is included on the R3 Board.

I brought a Transistor Set and Test it tomorrow.

Best regards
Joi
« Last Edit: April 14, 2021, 02:31:13 PM by Joiyco »