Print Page - m0 processor OTA?

Title: m0 processor OTA?
Post by: brolly759 on October 20, 2017, 10:46:09 AM

Does anyone know if any ARM M0 is ported over to work with the rf69 library?

If so, does OTA work?

If so, which ARM processor?

Thanks!

Title: Re: m0 processor OTA?
Post by: brolly759 on October 20, 2017, 11:08:07 AM

Also, would the Atmega328PB work as well?

Title: Re: m0 processor OTA?
Post by: Felix on October 20, 2017, 11:13:49 AM

No.
I support Dualoptiboot and the RFM69_OTA for 328p and 1284p only. But it's open source so have at it to port it.

Title: Re: m0 processor OTA?
Post by: oric_dan on October 20, 2017, 05:46:34 PM

BTW, I recently noticed there is a very nice and relatively inexpensive M0 board that has UNO-compatible headers, and uses the Arduino IDE. If there were a nice Moteino-radio shield that would plug into it, then ....

https://www.adafruit.com/product/3505

Title: Re: m0 processor OTA?
Post by: ryan-muirhead on October 29, 2017, 12:35:17 AM

Hi Guys,

I'd be willing to pay someone for their time to port OTA programming over to the m0 architecture (ATSAMD21G18). Please shout out if anyone is interested.

Title: Re: m0 processor OTA?
Post by: brolly759 on April 11, 2019, 07:42:22 PM

Has this been worked on, any update on m0 OTA?

Thanks

Title: Re: m0 processor OTA?
Post by: Felix on April 11, 2019, 09:27:57 PM

Yes, M0 supports OTA.
https://lowpowerlab.com/guide/moteino/moteinom0/

LowPowerLab Forum

Software support => Wireless Programming (aka OTA) => Topic started by: brolly759 on October 20, 2017, 10:46:09 AM