dear everyone,
I'm trying to communicat between a RFM69 (A RF tranceiver - Emitter in this case) and a RFM219(a basic receptor).
> I use the rfm219 in default mode (no registers modification, just VCC, GND and GPIO4 for received data packet). Default : 2,4kps / 868,35mhz. The GPIO is monitored on a pc with Dockligth sofware (like hyperterminal). My terminal is configured as 2400/8/N/1.
> An another hand the rfm69 with a transmit_message() in a while(1). The baudrate is defined at 2400 (register 0x03 = 0x34 / 0x04= 15).
During RFM emission, i receive a lot a UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU instead of "Hello"
If i do a set_frequency (868350000), it's worst, i'm not able to see my data
I think my serie of UUUUU means synchronisation or préambule data... but
There is somenone who do that before me ? I have forgot somethings ? tell me more please