LowPowerLab Forum
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Blog
Shop
Help
Search
Login
Register
LowPowerLab Forum
»
Hardware support
»
Projects
»
A solar supercap powered Moteino (15Farad charged by BQ25504)
Print
Pages:
1
...
20
21
[
22
]
Author
Topic: A solar supercap powered Moteino (15Farad charged by BQ25504) (Read 71214 times)
Felix
Administrator
Hero Member
Posts: 6866
Country:
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #315 on:
October 10, 2017, 11:04:29 AM »
HeneryH,
Did you see my blog post about the
solar powered Moteino+WeatherShield
?
Logged
HeneryH
Full Member
Posts: 229
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #316 on:
October 10, 2017, 11:32:38 AM »
I had not, thank you. I'll procure a 7.5
and 15
F and the other parts to see how they work with a MotionMot.
Edit - that series seems to top out at 7.5F.
«
Last Edit: October 10, 2017, 11:43:47 AM by HeneryH
»
Logged
Felix
Administrator
Hero Member
Posts: 6866
Country:
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #317 on:
October 10, 2017, 12:09:47 PM »
You can wire them in parallel to increase capacity
Logged
kni
NewMember
Posts: 41
Country:
The Knight who says Ni
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #318 on:
October 10, 2017, 01:43:42 PM »
I'm currently testing my own supercap project, based on Felix's blog.
One photo of it is in this thread here:
https://lowpowerlab.com/forum/general-topics/mouting-examples-of-a-bare-solar-cell/
Turns out my solar panel was way too big for the application, which drove the voltage to ~5.6v on a sunny day. Fortunately, the capacitor does not appear to be damaged, but I've brought it back inside until I put a zener diode on it to regulate the voltage. In any case, I'll create a more detailed write up once the little issues are hammered out.
«
Last Edit: October 10, 2017, 01:48:14 PM by kni
»
Logged
HeneryH
Full Member
Posts: 229
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #319 on:
October 10, 2017, 02:21:55 PM »
I'm going to order these to give it a try. Totally guessing on some of the values so if you see something wrong please let me know...
Solar cell -
https://www.digikey.com/product-detail/en/ixys/SLMD600H10L/SLMD600H10L-ND/3463130
Voltage @ Pmpp 5.01V
Power (Watts) - Max 111mW
Current @ Pmpp 22.3mA
Size / Dimension 0.866" L x 1.378" W x 0.079" H (22.00mm x 35.00mm x 2.00mm)
Super Capacitor -
http://www.mouser.com/Search/ProductDetail.aspx?qs=xIT89idmjZkhn0E0LyhRQQ%3D%3D
Capacitance: 7.5 F
Voltage Rating: 5 VDC
ESR: 55 mOhms
I'm a trained EE from a long long time ago but haven't done circuit design in decades. I know the basics of diodes, caps etc. Help would be greatly appreciated
Need some protective diodes to prevent back-flow current. Any suggestions for which ones? Is protective circuitry needed for over charging the cap? Seems like there are ICs purpose built for this but maybe these are overkill
http://cds.linear.com/docs/en/datasheet/3625f.pdf
and I also don't have the equipment or experience actually doing surface mount.
«
Last Edit: October 10, 2017, 02:32:56 PM by HeneryH
»
Logged
Felix
Administrator
Hero Member
Posts: 6866
Country:
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #320 on:
October 10, 2017, 02:56:05 PM »
HeneryH,
Just get some 5-6V rated 2-3W solar cells from ebay, they are cheaper.
The easiest way is to go with a shottky diode to prevent backflow, any junk box should have one, worst case use a regular diode for a much larger forward drop.
Logged
LukaQ
Sr. Member
Posts: 302
Country:
Re: A solar supercap powered Moteino (15Farad charged by BQ25504)
«
Reply #321 on:
March 05, 2018, 12:14:57 PM »
Quote from: WhiteHare on April 13, 2017, 12:12:36 PM
Good news! After installing Optiboot 6.2
Would you be so good and provide me with files I would need, even more so, what commands to run (or anybody else that knows how to). I can't use even the bootloader HEX that is already compiled, IDE just can't upload any sketch
«
Last Edit: March 06, 2018, 12:12:20 PM by LukaQ
»
Logged
http://www.classdaudio.eu
https://github.com/LukaGitH/Moteino
Print
Pages:
1
...
20
21
[
22
]
LowPowerLab Forum
»
Hardware support
»
Projects
»
A solar supercap powered Moteino (15Farad charged by BQ25504)