LowPowerLab Forum
Hardware support => MoteinoMEGA => Topic started by: DonpK on April 08, 2020, 02:02:01 PM
-
Is a MoteinoMEGA without a transceiver basically the same as an Arduino MEGA 2560? Without the transceiver are the MoteinoMEGA pins normally dedicated to the transceiver available for general use?
I have a project which is not wireless and I'm finding it difficult to find a MEGA 2560 without preinstalled headers which I don't want.
-
No, it is an Atmega1284P, as stated on the moteino specs page (https://lowpowerlab.com/guide/moteino/specifications/).
Why do you need the 2560?
-
I have a project which doesn't need a transceiver, thus my question if I use a Moteino MEGA without the transceiver, are the pins normally reserved for the transceiver available for general use?
-
I thought you were asking about whether Moteino MEGA without transceiver is == Arduino MEGA2560. Again, they are different MCUs so I belive to that question the answer is no. You can't use a MoteinoMEGA as if it was an Arduino MEGA2560, vastly different boards.
But to your new Q: If there is no transceiver installed, then yes, all the pins are free for other uses.
-
Thanks, Felix. Sorry my initial question was a little unclear.