Hi, What settings do I change to lower the bitrate / baud rate of the rfm69hw?
In the RFM69 Library, I can see the registers for many different bit rates, and in the function to initialize the RFM69 radio it looks like its setting the bit rate. Begin of CONFIG sent to radio
const byte CONFIG[][2] =
{
/* 0x01 */ { REG_OPMODE, RF_OPMODE_SEQUENCER_ON | RF_OPMODE_LISTEN_OFF | RF_OPMODE_STANDBY },
/* 0x02 */ { REG_DATAMODUL, RF_DATAMODUL_DATAMODE_PACKET | RF_DATAMODUL_MODULATIONTYPE_FSK | RF_DATAMODUL_MODULATIONSHAPING_00 }, //no shaping
/* 0x03 */ { REG_BITRATEMSB, RF_BITRATEMSB_55555}, //default:4.8 KBPS
/* 0x04 */ { REG_BITRATELSB, RF_BITRATELSB_55555},
/* 0x05 */ { REG_FDEVMSB, RF_FDEVMSB_50000}, //default:5khz, (FDEV + BitRate/2 <= 500Khz)
/* 0x06 */ { REG_FDEVLSB, RF_FDEVLSB_50000},
....
Which ones do I need to change and how to lower the bit rate?
Nick