Print Page - Moteino only runs from USB FTDI

Title: Moteino only runs from USB FTDI
Post by: ColinR on November 24, 2014, 01:10:34 AM

Hello,

I've a pretty standard sketch that has decided it will only run when I have the FTDI connected to a computer. FTDI on a USB PS, USB power from computer, PS, etc., nothing else will work. What is this a symptom of?

Thanks,
Colin

Title: Re: Moteino only runs from USB FTDI
Post by: ColinR on November 24, 2014, 04:22:55 AM

I'm not sure I understand why this is the result, but I tracked it to attempting to set properties of an object that was not initialized yet. I moved around bits so that NETWORKID and NODEID were attempting to be set before radio was created.

C

Title: Re: Moteino only runs from USB FTDI
Post by: Felix on November 24, 2014, 08:18:27 AM

Yes, sounds like some code glitch. It happened to me before also.

LowPowerLab Forum

Hardware support => Moteino => Topic started by: ColinR on November 24, 2014, 01:10:34 AM