Moteino ISCP and FTDI programming shield

[Charly86]

Hi all,

For those who use custom Moteino or want to program Moteino quickly without breadboarding, I just designed a quick shield that permit to program Moteino bootloader using direct connection with real ICSP connector and also program it with FTDI without soldering any headers on target board (this prevent FTDI headers of Moteino getting out of the board and increase board size). I've also added a LED to see if power is good before programming, a 10K Pullup on D10 line to avoid Atmel Fuse brick when RFM69 is already soldered on board, and a reset button (this one really miss on Moteino board, thank's Felix of adding it on Mega boards).

Project is shared on OSHPark so you can order directly but I attached schematic and board Eagle files.
All components are 0805 size so should be easy soldered by hands.

Based on Felix's Jig Article