Hi All,
I'm designing a case for my Moteino to use as a remote. Does anyone have a CAD model of a Moteino? If not I will make my own and put it up on GrabCAD... but it would save me some time if there is already one out there floating around!
Thank you,
you really need to write in English like the rest of us :)
See this page for whats available:
https://github.com/LowPowerLab/Moteino/tree/master/DXF
I can generate more recent ones if you really need the latest (slight variation but pinouts and size are the same).
Thanks Felix, I used the DXF and improvised a bit...
https://grabcad.com/library/moteino-pcb-trace-antenna-1
It is a rough model but should get people close enough to design an enclosure around the model for 3d printing etc.
Thank you!
I added a reference on the design page of the Moteino guide (https://lowpowerlab.com/guide/moteino/design-files/).
Quote from: doublec4 on March 29, 2018, 10:08:20 PM
Thanks Felix, I used the DXF and improvised a bit...
https://grabcad.com/library/moteino-pcb-trace-antenna-1
It is a rough model but should get people close enough to design an enclosure around the model for 3d printing etc.
Excellent! Could you put a step version on there as well? Thanks!
Quote from: perky on March 30, 2018, 01:04:16 PM
Excellent! Could you put a step version on there as well? Thanks!
Done.
I'll have the MEGA version done at some point as well and post back when it's complete.
Quote from: doublec4 on March 30, 2018, 04:31:33 PM
Done.
I'll have the MEGA version done at some point as well and post back when it's complete.
Great, thanks! I can confirm the step file opens up very nicely in FreeCAD, good work ;)
Quote from: doublec4 on March 30, 2018, 04:31:33 PM
I'll have the MEGA version done at some point as well and post back when it's complete.
Awesome, let me know when its done!