Print Page - 13 PCB Mount Pin Socket

Title: 13 PCB Mount Pin Socket
Post by: DRCO on October 18, 2015, 11:05:31 PM

Hi Forum,
Does anyone know where I could order a 13 pin PCB socket suitable for the Moteino R4?

Title: Re: 13 PCB Mount Pin Socket
Post by: Felix on October 19, 2015, 08:38:07 AM

I haven't found a good source, I usually just use 1x40 headers which are very common and I cut them (and if it's a female header I clean up the end if it has to be nice and flush).

Title: Re: 13 PCB Mount Pin Socket
Post by: DRCO on October 19, 2015, 11:52:45 PM

Thanks - I have a solution using 12 pin female headers with a 2 pin but end - but trying to find something a little more "professional" If I do I'll post it here.

Title: Re: 13 PCB Mount Pin Socket
Post by: odiephd on March 03, 2017, 01:14:54 PM

I found 14 pin headers that are really cheap from Phoenix Enterprises (http://www.phoenixent.com/). Search for Part# HWS1048.

I've attached a picture from their website.

Jim

Title: Re: 13 PCB Mount Pin Socket
Post by: DRCO on March 03, 2017, 05:35:12 PM

Thanks, but I've been buying 40 pin headers and scoring them with a sharp knife or razor at the appropriate length, then snapping them between pliers. A bit rough, but cleaned up with a nail file looks OK.
Still looking for 13 pin - will post if I find them

Title: Re: 13 PCB Mount Pin Socket
Post by: perky on March 03, 2017, 07:19:09 PM

You might want to check out Gradconn connectors, they do cheaper versions of Samtec connectors too:

https://www.gradconn.com/Products/BoardToBoard/2-54mm

Mark.

LowPowerLab Forum

Hardware support => Moteino => Topic started by: DRCO on October 18, 2015, 11:05:31 PM