Author Topic: MightyHat R3 Raspian Buster BOOT issue.  (Read 8619 times)

Magnus

  • NewMember
  • *
  • Posts: 4
MightyHat R3 Raspian Buster BOOT issue.
« on: April 06, 2020, 04:55:21 AM »
Hi

I have an issue when trying to use Raspbian Buster together with MightyHat R3 and Raspberry 2 Model B.
During boot there is somekind of crash that make the screen look like the attached picture.

If the MightyHat is physically removed from the Rasperry PI then Buster boots as expected.

This worked just fine with my old Jessie build.

Any ideas?

HeneryH

  • Full Member
  • ***
  • Posts: 229
Re: MightyHat R3 Raspian Buster BOOT issue.
« Reply #1 on: April 17, 2020, 09:23:35 PM »
Did you turn off login over serial port in raspi-config?

Felix

  • Administrator
  • Hero Member
  • *****
  • Posts: 6866
  • Country: us
    • LowPowerLab
Re: MightyHat R3 Raspian Buster BOOT issue.
« Reply #2 on: April 18, 2020, 09:30:27 AM »
Did you turn off login over serial port in raspi-config?
FWIW that is explained here: https://lowpowerlab.com/guide/gateway/setup-software/