Text only | Text with Images

LowPowerLab Forum

Hardware support => MightyHat => Topic started by: Magnus on April 06, 2020, 04:55:21 AM

Title: MightyHat R3 Raspian Buster BOOT issue.
Post by: Magnus on April 06, 2020, 04:55:21 AM
Hi

I have an issue when trying to use Raspbian Buster together with MightyHat R3 and Raspberry 2 Model B.
During boot there is somekind of crash that make the screen look like the attached picture.

If the MightyHat is physically removed from the Rasperry PI then Buster boots as expected.

This worked just fine with my old Jessie build.

Any ideas?
Title: Re: MightyHat R3 Raspian Buster BOOT issue.
Post by: HeneryH on April 17, 2020, 09:23:35 PM
Did you turn off login over serial port in raspi-config?
Title: Re: MightyHat R3 Raspian Buster BOOT issue.
Post by: Felix on April 18, 2020, 09:30:27 AM
Quote from: HeneryH on April 17, 2020, 09:23:35 PM
Did you turn off login over serial port in raspi-config?
FWIW that is explained here: https://lowpowerlab.com/guide/gateway/setup-software/
Text only | Text with Images