Print Page - MightyHat Enclosure

Title: MightyHat Enclosure
Post by: ajax0117 on August 05, 2017, 04:12:17 PM

Hi Felix,

Do you by chance have the most recent .dxf file for the MightyHat enclosure that will work with version R3?

Thanks

Title: Re: MightyHat Enclosure
Post by: Felix on August 07, 2017, 10:07:32 AM

No problem, I just published it here (https://lowpowerlab.com/guide/mightyhat/cad-enclosure/).

Title: Re: MightyHat Enclosure
Post by: ajax0117 on August 07, 2017, 11:33:10 AM

Thanks Felix,

Another quick question. I know you are out of the Nokia LCD for the MightyHat but will the Nokia from Adafruit work the same and have the same dimensions for the enclosure. I didn't see the cutout on the DXF you posted.

Here is the link https://www.adafruit.com/product/338

Thanks again

Title: Re: MightyHat Enclosure
Post by: Felix on August 07, 2017, 01:01:48 PM

Actually I just got 2 more right now, check again.
Since I never used the adafruit variant, I don't know if it will work, so I cannot give any guarantee for that.
Technically if it's 3.3v, same pinout, and same mounting hole positions, it should work.

LowPowerLab Forum

Hardware support => MightyHat => Topic started by: ajax0117 on August 05, 2017, 04:12:17 PM