Print Page - Blinking shutoff [intentional: part of test sketch!]

Title: Blinking shutoff [intentional: part of test sketch!]
Post by: hockeyprogrammer on July 04, 2018, 08:38:38 PM

I recently received a mighty hat. I followed the assembly guide and don't see any issues with the soldering. When I attach the mighty hat to the pi or the ftdi all I get is a blinking shutoff led. Any ideas where to look?

Title: Re: Blinking shutoff
Post by: hockeyprogrammer on July 04, 2018, 09:46:32 PM

All set the issue was a faulty USB cord. The sketch uploaded nicely and is working.

Title: Re: Blinking shutoff
Post by: Felix on July 05, 2018, 09:29:17 AM

Great, thanks for the update.

FWIW - the blinking shutoff LED is a test sketch that I upload on MightyHats that are ordered *WITHOUT* a radio module.
There is nothing wrong with the hardware, the test sketch is doing the red LED blinking.

LowPowerLab Forum

Hardware support => MightyHat => Topic started by: hockeyprogrammer on July 04, 2018, 08:38:38 PM