Author Topic: ListenMode settings to support ULP  (Read 12799 times)

TomWS

  • Hero Member
  • *****
  • Posts: 1930
Re: ListenMode settings to support ULP
« Reply #30 on: September 23, 2015, 08:47:01 AM »
Updating on the 'errors' I had cited in my post https://lowpowerlab.com/forum/index.php/topic,1307.msg8918.html#msg8918, it turns out that I was misreading the data and the Tiny TH Mote has had NO errors (out of 477 samples) since making the change to remove the delay in the burst transmission loop.   That is compared to the approximately 35% error rate from before the change.

Apparently my Gateway has been acting up for another reason, but that was hidden by my hardware Watchdog!  Sigh, what a tangled web we weave...

Tom
The updated RFM69_ATC library has been posted to the github: https://github.com/TomWS1/RFM69_ATC/tree/ListenModeExtensions
« Last Edit: September 23, 2015, 09:13:49 AM by TomWS »

ulli

  • Jr. Member
  • **
  • Posts: 87
Re: ListenMode settings to support ULP
« Reply #31 on: September 23, 2015, 11:44:23 AM »
You are welcome Tom  :P ;)