Print Page - Serial header gets 3.3 V out - Bluetooth HC-06 needs at least 3.6 V ?

Title: Serial header gets 3.3 V out - Bluetooth HC-06 needs at least 3.6 V ?
Post by: RK_aus_S on June 07, 2019, 12:05:57 PM

Hi

I just got my CurrentRanger and I wonder if the device supplies enough voltage on the serial header to operate the HC-06 Bluetooth device?
May be a silly question, but I measure only 3,3 Volts on the serial header, but it seems the HC-06 needs at least 3,6 V, doesn't it?

Regards
Roman

Title: Re: Serial header gets 3.3 V out - Bluetooth HC-06 needs at least 3.6 V ?
Post by: Felix on June 07, 2019, 02:41:45 PM

It's fine with 3.3V.

LowPowerLab Forum

Hardware support => CurrentRanger => Topic started by: RK_aus_S on June 07, 2019, 12:05:57 PM