Hi,
i just got the ATXraspi board and got it all set up as the instructions say (physically)
i then got onto the coding (im totally new to this :/)
im using a brand new mc with RaspBMC running, i follow the commands to get the wiringPi downloaded and it tells me,
pi@raspbmc:~/wiringPi$ ./build
wiringPi Build script
=====================
WiringPi Library
sudo: make: command not found
./build: 59: ./build: make: not found
Make Failed...
Please check the messages and fix any problems. If you're still stuck,
then please email all the output and as many details as you can to
[email protected]
so i found on here that for it you need to install the make and gcc (http://lowpowerlab.com/forum/index.php/topic,17.msg170.html#msg170)
when i try to do that i get the message of
pi@raspbmc:~$ sudo apt-get make
E: Invalid operation make.
now i am really stuck and need help to get this working :(
Simon
I'm not sure how to help with that, I would suggest asking the creator of WiringPi how to get it going on RaspbMC.
thanks, ive emailed them :D
ok so ive got it all set up and using the button to turn on but now cant get it to turn off
Be sure to follow the steps at lowpowerlab.com/atxraspi
Your RaspbMC will need to run rc.local at startup where the script is running from, if not your Pi won't listen for a HALT command from ATXRaspi.
During startup watch for the script starting up, it should print:
ATXRaspi shutdown script starting…
Asserting pins (7=in,low; 8=out,high)
Again .. just check the guide, everything is in there.
Also see this other topic where another user integrated ATXRaspi in a RaspbMC: http://lowpowerlab.com/forum/index.php/topic,17.0.html