I wanted to see if any other Pi3 owners using ATXraspi were having issues with bluetooth?
My BT and wifi seems to be dead and I wanted to make sure it wasn't due to available power that is passed through the ATXRaspi which is supplied by my 2.5A adapter.
I'm able to turn on the bluetooth, but I get a UART failure.
It shouldn't, ATXRaspi just passes power to the Pi, does nothing else.
FWIW the bluetooth in Pi3 was switched to the traditional /dev/ttyAMA0 serial port.
Yeah I don't know what that means, I'm pretty ignorant with the Pi/Linux software.
I know the BT worked at one point, but I can't recall if I tested it before or after installing the ATXraspi. I have the raspi hard wired in too, so taking it out to test is not ideal.