Author Topic: ATXRaspi with odroid-c2  (Read 2117 times)

Colin

  • NewMember
  • *
  • Posts: 8
  • Country: england
ATXRaspi with odroid-c2
« on: March 30, 2017, 09:15:42 AM »
Has anyone ATXRaspi working a odroid-c2? Because I don’t get this working. The first question is what version .py or .sh I must install. Then I’m not sure what for pin numbers I must use in the script. I want to use the header pins 22 and 24.

I have now installed the .sh and the device keeps on rebooting :-( Is there a way to stop the script? Or have I to do a complete new install

ps. I'm running Debian on it
« Last Edit: March 30, 2017, 09:19:05 AM by Colin »

Felix

  • Administrator
  • Hero Member
  • *****
  • Posts: 6866
  • Country: us
    • LowPowerLab
Re: ATXRaspi with odroid-c2
« Reply #1 on: March 30, 2017, 09:27:49 AM »
Should probably be doable, never tried it. ATXRaspi was tailored for operation with Pi and Raspbian, which is Debian based.

phoax

  • NewMember
  • *
  • Posts: 2
Re: ATXRaspi with odroid-c2
« Reply #2 on: July 31, 2018, 08:43:55 PM »
Did you manage to make it work?

When I plug the ATXRaspi it controls the power on, but the soft power off doesn't work. I've just tried with the .py script.

Felix

  • Administrator
  • Hero Member
  • *****
  • Posts: 6866
  • Country: us
    • LowPowerLab
Re: ATXRaspi with odroid-c2
« Reply #3 on: August 01, 2018, 10:32:15 AM »
You will need to get the script to run on your distribution. Ie to make it run a shutdown/reset when the SHUTDOWN GPIO is set HIGH.

phoax

  • NewMember
  • *
  • Posts: 2
Re: ATXRaspi with odroid-c2
« Reply #4 on: August 01, 2018, 07:47:22 PM »
Ok thank you, I'll try  :)