LowPowerLab Forum

Hardware support => ATXRaspi => Topic started by: Colin on March 30, 2017, 09:15:42 AM

Title: ATXRaspi with odroid-c2
Post by: Colin on March 30, 2017, 09:15:42 AM
Has anyone ATXRaspi working a odroid-c2? Because I donít get this working. The first question is what version .py or .sh I must install. Then Iím not sure what for pin numbers I must use in the script. I want to use the header pins 22 and 24.

I have now installed the .sh and the device keeps on rebooting :-( Is there a way to stop the script? Or have I to do a complete new install

ps. I'm running Debian on it
Title: Re: ATXRaspi with odroid-c2
Post by: Felix on March 30, 2017, 09:27:49 AM
Should probably be doable, never tried it. ATXRaspi was tailored for operation with Pi and Raspbian, which is Debian based.
Title: Re: ATXRaspi with odroid-c2
Post by: phoax on July 31, 2018, 08:43:55 PM
Did you manage to make it work?

When I plug the ATXRaspi it controls the power on, but the soft power off doesn't work. I've just tried with the .py script.
Title: Re: ATXRaspi with odroid-c2
Post by: Felix on August 01, 2018, 10:32:15 AM
You will need to get the script to run on your distribution. Ie to make it run a shutdown/reset when the SHUTDOWN GPIO is set HIGH.
Title: Re: ATXRaspi with odroid-c2
Post by: phoax on August 01, 2018, 07:47:22 PM
Ok thank you, I'll try  :)