Text only | Text with Images

LowPowerLab Forum

Hardware support => ATXRaspi => Topic started by: Maximey30 on August 27, 2016, 01:37:12 PM

Title: ATX raspi with ups will make trouble?
Post by: Maximey30 on August 27, 2016, 01:37:12 PM
At first my name is Maxime and i'am french, sorry for my bad english...
I would like to buy an ATX raspi but i will put on my raspberry this UPS:
http://www.pimodulescart.com/shop/item.aspx?itemid=30

i see on your web page a caution about power on the raspi when the atx haven't electricity,  does the ups will brake the atx when an electricity failure arrived?
thank you
Title: Re: ATX raspi with ups will make trouble?
Post by: Felix on August 29, 2016, 08:38:03 AM
ATXRaspi is just a power switch that sits in between your power supply and your Pi.
It doesn't care what the power supply is.
Title: Re: ATX raspi with ups will make trouble?
Post by: Maximey30 on August 29, 2016, 10:02:29 AM
OK thanks for your answer, but the power from the UPS directly go in the gpio if an electricity failure arrived (say my if it's wrong ) and the ATX raspi is on the usb no?
Title: Re: ATX raspi with ups will make trouble?
Post by: Felix on August 29, 2016, 11:39:56 AM
The power should go to the ATXRaspi since it is the switch.
All is explained in the instructions and video here: http://lowpowerlab.com/atxraspi
Text only | Text with Images