First I would like to say that I'm very new to all this so forgive me for the noobie questions moving forward.
I purchased a couple RFM69HW 868/915 MHZ Moteino's and I'm just about finished soldering everything up. I was about ready to solder the antenna's but had a question about the length. According to the Moteino "pinout" page, the length should be 86mm (868) / 82mm (915). The antennas that came with mine are both 79mm.
After reading some posts on damaging the units from either incorrect antenna or wrong settings I wanted to make sure the lengths are correct.
Thanks,
GM