Getting ready to add the Sparkfun UV sensor to the project.
Also swapped out the anemometer from Adafruit with the WeatherRack unit from SwitchDoc Labs. This allowed us to remove the power booster which was required to up the voltage to 7v for the anemometer. It also added wind direction and a rain bucket. Just finished the integration and now the outdoor unit is gathering temp, humidity, pressure, wind direction, wind speed and rain amount. Can't sleep the radio and MCU as much since we get interrupts for the wind speed and rain bucket.
Once I gather this info I also calculate the dewpoint, wind chill and heat index.
Still need to add the Lightning Sensor. Problem is around here that we don't get a lot of lightning storms and there appears to be a fair amount of tweaking.
If you want to see what it looks like on Freeboard, check out this URL:
https://freeboard.io/board/MCsvrV