LowPowerLab Forum

Hardware support => Projects => Topic started by: Joshua on January 13, 2018, 02:15:01 PM

Title: RFM Moteino 3 in 1 sensor 3d case for you to download
Post by: Joshua on January 13, 2018, 02:15:01 PM

This project is using a Moteino to replace an older Aeon Labs Zwave sensor. I only have motion, temperature, and humidity on this particular build.

Parts list:

- Moteino
- Power Shield
- TD TAD-898 3.3v IR infrared sensor module. Be sure to insulate the bottom of this board to avoid shorting out on the Moteino
- 3d printed case. https://www.thingiverse.com/thing:2756189 
- DTH11  digital temperature humidity sensor module
- 3.7V 650mAh Lipo battery

This post has the sketch I used. http://homeautomation.proboards.com/post/1613/thread

Enjoy!!

(https://cdn.thingiverse.com/renders/f0/13/ce/b4/33/b83b02138742f266e32285bd4525c9d3_preview_featured.jpg)

Title: Re: RFM Moteino 3 in 1 sensor 3d case for you to download
Post by: Felix on January 15, 2018, 01:57:35 PM

Nice project, thanks for sharing the resources :)