Programming moteino

luisr320 · September 23, 2015, 08:26:35 PM

Make a backup of your libraries, erase all libraries in Documents/Arduino/libraries and paste all libraries in the Program_Files/Arduino/libraries folder.

Kilo95 · September 23, 2015, 10:31:13 PM

Did that just now and set preferences in Arduino to reflect correct library. Now
It can't find wirelesshex69. Maybe I'll play with it more tomorow

luisr320 · September 24, 2015, 07:01:48 AM

Here you go:
https://github.com/LowPowerLab/WirelessProgramming/archive/master.zip

Kilo95 · September 24, 2015, 08:10:14 AM

Thanks. I have the wireless hex library installed. It just can't find it for some reason

luisr320 · September 24, 2015, 08:47:32 AM

Instalo the library directly from the IDE using the ZIP file. Then restart the IDE

Kilo95 · September 24, 2015, 07:56:55 PM

ok. finally got the gateway GUI to work. everything is reading fine through there. my router is set to forward ports 80 and 443 on the static ip for my RPi but i can't get it to pull up from outside my home network using my public ip address. still working on that. thanks for all the help

luisr320 · September 25, 2015, 05:22:31 AM

Can you ping your Rpi static IP?
Open a cmd window on your Windows and enter ping 192.168.0.100, replacing the ip numbers with the correct ones, of course.
Do you get any reply?

Kilo95 · September 25, 2015, 08:41:50 AM

yep. worked fine. tx/rx all 4 packets without problem. double checked my router config and i DO have it forwarding 80 and 443 internal to 80 and 443 external on my RPi's static ip. double checked my public ip and entered that. still not working. what am i missing?

Kilo95 · September 25, 2015, 09:15:16 PM

Ok. So my isp was blocking most ports. I asked nicely and they opened the ports I wanted. I have to adjust the placement a little. It's measuring to the top of the pump which is 20cm down. Still have to get the messaging alert working. In which file is the distance set at which it sends an alert? I may need to drop the distance down to 12-15cm

Kilo95 · September 26, 2015, 12:37:37 PM

Ok everything is working except text/email alerts. I can log in from remote network and see the gateway GUI working. (My isp was blocking ports. They are open now). I double checked my email, password, and cell address in settings.js. Is there anything I need to configure with Google? Any suggestions how to get the text alerts to work? (Gmail is my email)

Kilo95 · September 27, 2015, 08:05:03 AM

If it's easier to use an aol email address I can make
A new one. I tried to look and see how to change that but wasn't successful. Could someone vel me out with that?

luisr320 · September 27, 2015, 02:10:37 PM

Sorry, but you'll have to wait for someone to get you going on that project. I never used a Raspbarry Pi so I have no idea why you are stuck now.

Felix · September 27, 2015, 10:41:24 PM

Kilo95,
You can use your gmail account. I would not put my straight password in there, instead i would generate a specific app password, here's a guide
Then you send email using your own gmail account to anywhere you want. To get SMS you send an email to your phone's associated SMS address (it's an email at your carrier, usually your [email protected]).

Kilo95 · September 28, 2015, 07:33:26 AM

Ok. I tried it with the straight password and used my @vtext.com address and it didn't work. I'll try making an app specific password. Which file do I adjust the distance in which it'll alert?

Felix · September 28, 2015, 09:19:42 AM

google your carrier for the email address. I don't have instructions for every carrier in the world, i just know what works for at&t and verizon.
What distance are you measuring for?