Conflicting use of `resetUsingWatchdog(unsigned char)'

[K1JOS]

Early in my project development I have found it useful to sometimes reset my remote node (outdoors) from the Gateway (indoors).  So, I included a special command code among my other commands that can be sent in my Payload from Gateway to the node that sets and checks for 'reset_flag' == true and runs:

Code Select Expand

/// Use watchdog to reset
void resetUsingWatchdog(boolean reset_flag)
{
  //wdt_disable();
  if (reset_flag) Serial.print("REBOOTING");
  wdt_enable(WDTO_15MS);
  while(1) if (reset_flag) Serial.print('.');
}

I now want to include wireless programming and so have added to the node sketch under the (radio.receiveDone()) function

Code Select Expand

CheckForWirelessHEX(radio, flash, true);

However the compiler is giving me an error as there are now "multiple definition of `resetUsingWatchdog(unsigned char)'"

How can I best resolve this problem?

thanks

[Felix]

That means resetUsingWatchdog() is already defined. Either rename your function or use the one already defined in the WirelessHex69 library.