I printed out the OLED case from the GitHub repo (https://github.com/LowPowerLab/CurrentRanger/blob/master/CR_OLED.stl) and it's too tight to fit the screen into it. Was there a new model OLED selected? If so is there a newer STL I should be printing?
With each OLED batch the dimensions can be slightly different, so I adjust (usually enlarge) the STL by a fraction of percent in the slicer.
For instance the current OLED batch is printing the STL at 100.4% and it fits perfectly.
Even then some OLEDs have rough edges so I sand away the PCB Vscoring a bit to make them fit.
I did reupload the STL right now anyway (https://github.com/LowPowerLab/CurrentRanger), not sure how it was different but I may have adjusted it back a few years ago when I went from blue oleds to black ones. Give this a try, let me know how it works.
Awesome! Thank you very much. I will give it a try tonight. Should have just thought to try that on my own, forgot you can easily scale models in the slicer.
Came out perfect