Hi,
During the weekend I was wiring up my ATXRaspi Rev2 and experienced some issues.
1. After wiring it up and finally doing the power connection, the Raspi was directly starting (without pressing the button).
2. After 10-20 sec the lights on the Raspi went down for about a sec and the Raspi was restarting. This will go on forever.
I have measured the power output of the ATXRaspi and I noticed a power drop below 5 Volt when the Raspi does down.
Without the ATXRaspi it is running fine.
Thank you in advance for your support,
Balle